Hengbon Industrial Co.,Ltd
Hengbon Industrial Co.,Ltd
Add to Cart
1.We are end manufacturer
2.Round industrial knife/cutter for industrial machine
3.24-year work experience in this line
We manufacture slitter knives up to 1500mm(59.06 inches) in diameter for slitting and edge-trimming lines.
Operatinal Progress:
Steel-making→→Blanking→→Forging Steel→→Rough Progressing→→Heat Treatment→→Finishing→→Testing
Knives are available with ground, lapped or polished side faces.
Slitter knives are manufactured to a thickness tolerance of ±0.002mm-0.003mm(±0.00007 inch-±0.00012inch).
Parallelism tolerances is within 0.003mm (0.00012 inch)
These are all prerequisites for the best possible slitting results.
High cost performance, ISO9001:2000, Punctual delivery
Materials: H13, H13K, 5CrW2Si, 6CrW2Si, Cr12MoV,HMB,HMK etc.
Common Size Table
|
Circular Knife | Type | Size |
|
Top slitter | 62×42×1.5 | |
| 75×45×1 | ||
| 140×95×1 | ||
| 105×75×1.5 | ||
| 100×75×1.5 | ||
|
Bottom slitter | 70×45×10 | |
| 90×65×10 | ||
| 60×35×9 | ||
| 108×80×20×18 | ||
| 80×50×10×8 | ||
|
Flat slitter | 100×30×5 | |
| 140×40×5 | ||
| 150×35×3 | ||
| 160×38×3 | ||
|
Dish slitter | 100×60×4×3 | |
| 130×60×3×2 | ||
| 150×90×2×3 | ||
| 190×75×3×3 | ||
|
Knife ring | 114×100×40 | |
| 200×180×50 | ||
| 200×162×92 | ||
| 450×410×105 |
requirements;